TIL Chemistry department is equipped to conduct Analysis of Metal, Oil, Gas, Drilling Fluids, Chemicals, Mud, Effluents etc., and also help the industry by providing extensive consultancy in identifying & cross-checking the material’s elemental composition, comparing results, analyzing and investigating, arbitrations on material selection & evaluation. The tests conducted regularly are highlighted below:
- Analysis of Precious Metals Potable and Waste Water Analysis
Scales and Sludge Analysis Analysis of Drilling Fluids
Analysis of Ores and Minerals Industrial Effluents Analysis
Mud Analysis Paints Analysis
Oils and Fuels Analysis Evaluation of Biocides
COD and BOD Levels etc. Positive Material Identification (PMI)
Effluent and Sludge Analysis Sampling of Waste Effluents
Microbiological Testing of Domestic Drinking & Swimming Pool Water
Trans Asia Industrial Laboratories offers the most advanced and unique Environmental Sampling and Chemical Analysis services in the Middle East/Gulf region.
Trans Asia Industrial Laboratories utilizes an array of advanced instruments like Atomic Absorption Spectrophotometers with Graphite Furnace, Inductively Coupled Plasma Spectrometer (ICP), and ICP-MS, Gas Chromatographs with various detectors (FID, PID, Dual-ECD). Numerous gas chromatography and several GC Mass spectrometers are utilized at Trans Asia Industrial Laboratories on a daily basis. In addition, Trans Asia Industrial Laboratories also utilizes Fourier Transform Infrared Spectrometer (FT-IR) for various determinations. Trans Asia Industrial Laboratories provides its clients with sophisticated analysis to meet the demanding requirements of environmental analysis.
Tests are conducted at Trans Asia Industrial Laboratories in accordance with the latest US EPA, NIOSH, MASA, APHA, HSE, BS, ASTM, and NACE analytical methods.
A full complement of routine analysis is conducted on various matrices:
|Marine Life||Groundwater||Domestic Water|
|Plant Tissue||Seawater||Formation Water|
|Soil||Reverse Osmosis||Recreational Water|
|Sediment||Well & Desalination Water|
|Sludge||Raw & Treated Wastewater|
Parameters Routinely determined using ICP & ICP-MS are
Environmental Analysis – Organic Constituents determined by Lonestar are
|Aromatic Volatile Organics – BTEX||Chlorinated Hydrocarbons|
|Crude & Refined Product Fingerprinting||Halogenated Volatile Organics|
|Herbicides and Pesticides||Nitroaromatic and Cyclic Ketones|
|Organic and Volatile Acids||Halo Acetic Acids|
|Tri Halo Methanes||PCB’s|
|Polynuclear Aromatic Hydrocarbons (PAH)||Phthalate Esters|
|Phenols||Total Organic Halides|
|Total Petroleum Hydrocarbons (DRO/GRO)||Volatile Organic Compounds|
|Semi-Volatile Organic Compounds||Halo Phenols|
Biocide Analysis & Efficacy Studies for Bacteria
|Analysis of Corrosion Products||Cyclic Polarization|
|Coupon Corrosion Rate||Elastomer Exposure|
|Electrochemical Corrosion Rate||Optimization of Dosage Rate|
|Quality Control by FTIR||Wheel & Bottle Tests|
General Chemistry – Non-Metallic Components
|Total Khjehdl Nitrogen (TKN)||BOD|
Microbiology on various matrices
Chemical Composition of Metals & Alloys
Analysis of carbon steel, stainless steel, duplex steel, nickel-based alloys, and other alloys – these Metals and Alloys are analyzed at Trans Asia Industrial Laboratories using an Optical Emission Spectrometer (OES). Carbon and Sulfur are analyzed using ELTRA/LECO. Low levels of alloying elements in steel are analyzed either on the AAS/ICP/ICP-MS. The following elements are routinely analyzed on steel samples:
Corrosion and Scale Inhibitors
In the past numerous years, Trans Asia Industrial Laboratories has analyzed extremely diverse scale and corrosion products from oil and gas fields. The methodologies utilized are either standards NACE recommended or complex analytical techniques that were developed over numerous years by our staff at local and international facilities.
Analysis of anions in Drinking water, Groundwater, Surface water & Seawater is conducted using an Ion Chromatograph. The level of Detection is at Parts Per Billion (ppb) for the following components:
Total Organic Carbon Analysis (TOC)
Analysis of Organic Carbon in Drinking water, Seawater, Groundwater, and Surface water is conducted using a TOC analyzer capable of analyzing Total Organic Carbon, Dissolved Organic Carbon and Purgeable Organic Carbon
Total Organic Halogens (TOX)
Analysis of Total Organic Halides in Drinking water, Seawater, Groundwater, Surface water and Soil.
The level of Detection is Parts Per Million (ppm).
Trans Asia Industrial Laboratories has been providing testing services to the local industry for numerous years. The purpose of testing may be for quality control or compliance monitoring to regulatory requirements of the Local, Municipal or Federal agencies or for license renewal of various manufacturing industries.